# 266AMC SMALL 45 degree ANGLE HAND PIECE WITH ADAPTER
45 degree angle hand piece with sealed ball bearings and a head length of only 0.79 inches (20 mm), with a height of only 0.5 inches (12.8 mm). This will allow you to get into all the small bore engines, down to 25 mm bore. Comes with an 1/8" collet for 1/8" shank accessories. Also available with 3/32" collet, and 3 mm collet (sold separately) . Additional collets: 266AMC Collets Ideal tool to chamfer or bevel the edges of 2 stroke port windows.
The 266AMC has left hand rotation gearing. This requires left hand cut carbide burrs for the TXMC and most clockwise spinning drive motors. When used with the SRMC motor, simply switch the motor to reverse and any 1/8", 3/32", or 3 mm carbide burrs can be used.
The 266AMC can be used in very small 2-stroke engines, including 150 cc, 125 cc, 100 cc, 50 cc, and even down to 30 cc cylinders!
EXCELLENT FOR TIGHT AREAS ON SMALL CC ENGINES SUCH AS KART RACERS, RC CARS, SCOOTERS, CHAINSAWS, 2 Stroke RC Speed Boats, AND " POCKET ROCKET " MINI BIKES !
TJ's tips: "Modern 2 strokes are moving toward smaller displacements, 80 cc and 50 cc are now fairly common. The 266AMC is perfect for this range, and the angle I use for awkward and difficult to reach angles on 80 cc KX's, chainsaws, scooters, mini bikes, go karts, smaller snowmobiles, and even short stroke marine engines."
THE PERFECT 45 DEGREE HAND PIECE FOR SMALL DISPLACEMENT 2 STROKE / 2 CYCLE ENGINES
THE IDEAL TOOL FOR PORTING TRANSFER PORTS ON TWO STROKE ENGINES OR MOTORS and odd angles on port tunnels and ducts.
45 degree rotary tool
For use in 500 to 20,000 rpm range
For more shipping, payment, or ordering options simply email this product to [email protected] . We also accept Visa and MasterCard!
(